| Input stage — Extremely low noise
and low distortion
Maximum input signal — 8.5 VRMS @ unity gain
setting/.85 VRMS @ +20dB gain
Slew Rate — 22V/us
Input impedance — 2Meg ohms
Thd — <.003% @ 1Vo
Noise — All controls set “flat”/118dBV,
referred to input with gain set at +20dB
All controls set “flat”/106dBV, referred
to input with gain set at unity |
“Worst Case” noise —
94dBV, all EQ set to full boost, all Q controls set
to full narrow, frequency controls set to highest frequency.
3 Band EQ — each band has adjustable Q (bandwidth)
from .58 to 9.4 with 15 dB of boost and cut available
Low Frequency Band — Frequency adjustable from
39 Hz to 408 Hz
Midrange Frequency Band — Frequency adjustable
from 212 Hz to 2.35 KHz
High Frequency Band — Frequency adjustable
from 1.8 KHz to 20 KHz |
Notch Filters — Q (bandwidth) fixed at 9.0 with
15 dB of cut available
Notch Filter #1: Frequency adjustable from 40 Hz-400
Notch Filter #2: Frequency adjustable from 80 Hz-800
Misc. Features
Input Jack — 1/4” Stereo, input on tip
/ output on ring, allows interface with DTAR Solstice
(Acoustic Mixer) using a single, stereo cable.
Output Jack — 1/4” Mono
Power Supply — Internal +/- 15V derived from
15VAC external, wall mounted power transformer. |
